Holding A Call - Panasonic KX-TGP600G Operating Instructions Manual

5.1.2 Holding a Call

To transfer an intercom call
Outside calls can be transferred between 2 handsets/desk phones.
[In standby mode]
1. /
MENU
2. /
INT
3. [ ]/[ ]: Select a desired handset/desk phone.
4. Wait for the paged party to answer.
5. KX-TPA60:
*1
KX-TPA65/KX-TPA68:
On-hook
*1
When connected to a base unit other than the KX-TGP600, the operation is as follows.
*1
KX-TPA60:
/ /[XFER/CLR]
KX-TPA65:
/ /[TRANSFER/CLEAR]
KX-TPA68:
/ /[TRANSFER]
5.1.2 Holding a Call
You can put a call on hold by holding the call at your extension.
Holding
To hold the current call
1. KX-TPA60:
/ /[HOLD/MSG]
KX-TPA65/KX-TPA68:
/ /[HOLD]
Note
• If you select a LINE key other than the one for the current call, the call is put on hold
or is disconnected depending on the Automatic Call Hold settings. For details,
contact your phone system dealer/service provider.
To retrieve a call on hold
1. KX-TPA60:
/ /[HOLD/MSG]
KX-TPA65/KX-TPA68:
98
/ during a conversation.
/
Intercom
OK