Manual Mode; Selecting An Effect Type; Turning Individual Effects On And Off; Editing Parameters - Yamaha GW50 Owner's Manual

MANUAL MODE

EFFECT SECTION
The Distortion, Equalizer, Chorus and Reverb/
Delay effect blocks feature different effect types.
Press the Type switch to step through the available
effects. The LED of the selected effect lights.
When not assigned to a group, individual effect
blocks can be turned on and off in the Manual
mode. To do this, make sure that MEMORY ON/
OFF is selected in the ASSIGNABLE Block (the
MEMORY LED flashes), then press the Pedal
Switch of the appropriate effect block. The LED of
the selected effect lights when the effect is on.
(For information on assigning effects to a group,
see page 45.)
Effect parameters can be edited in the Manual
mode. The Manual mode is designed to be a kind
of "blank slate" on which you can make settings as
you wish. If you create some settings in the
Manual mode that you want to keep as an effect
program, save them to a program number (see
"Saving the Manual Mode Settings to an Effect
Program," page 50).
1.
Select the desired type of effect with the
Type button in each effect block.
2.
Adjust the desired parameters with the knobs
in each effect block. (The display automati-
cally shows the adjusted parameter name and
value.)
44
MANUAL MODE
MANUAL MODE
1.
Simultaneously hold down
2.
To select a parameter, keep holding down
and repeatedly press
to step through the sub parameters
for all selected Equalizer, Chorus and
Reverb/Delay effects (indicated by the lit
green LEDs in the effect blocks) and the
Noise Gate.
Or, after step #1, release
press one of the effect selector buttons be-
neath the LCD (
step through the sub parameters of the corre-
sponding effect. Pressing
selects the Noise Gate parameter.
3.
Adjust the selected parameter with the [–]/[+]
buttons.
and press
.
and simply
, , and
or
) to