Hpf/Lpf Screen (Mesa Mode Only) - Yamaha MY8-LAKE Owner's Manual

7.
Tap the [Filter Edit] button to
adjust filter gain, frequency
center point and slope.
8.
Tap any of the blue boxes that
appear at the top left of the
screen to manually enter
specific values if needed.
9.
If the [Frequency Lock] button at
the top left of the screen is
orange, tap the button to disable
this function.
NOTE
Frequency Lock is enabled by default
and restricts filter selection and frequency
adjustment by tapping and dragging on
the red 'X' filter points. When enabled, this
feature avoids accidental EQ adjustments
requiring selection of PEQ filters by
tapping on the associated filter box at the
top of the screen, and frequency
adjustment is only permitted using the EQ
filter edit tool described in step 6. For
GEQ, this feature forces the user to select
a GEQ filter by dragging the EQ selection
tool at the bottom of the screen.
10.
Tap on the [GEQ2] tab at the top
of the screen.
NOTE
The EQ curve from the PEQ1 is visible on
GEQ2; the EQ overlays stack on top of
each other having a compounding effect
on the resulting EQ.
11.
Tap on the associated filter point
'X' to select a GEQ2 filter that
overlaps the PEQ1 Mesa filter
frequency range.
12.
Drag the filter point up or down
to boost/cut.
"X" filter points
The GEQ filter affects the overall EQ
curve indicated by the white line (i.e.
the sum of all filters on all PEQ/GEQ
overlays that affect the selected
module).
HPF/LPF Screen
(Mesa mode only)
The HPF/LPF screen provides control of
high- and low-pass filters that affect the
overall EQ on the selected module. Follow
the steps below to set and adjust HPF or
LPF filters on a Mesa module.
1.
Tap the [Home] button, then tap
a module icon.
2.
Tap the [EQ] tab at the top of the
screen (if necessary), then tap
the [HPF/LPF] tab.
3.
Tap the [HPF Enable] and the
[LPF Enable] buttons (so that
they turn orange).
MY8-LAKE Owner's Manual 19