Manual Punch In/Out Rehearsal - Yamaha D24 Owner's Manual

Manual Punch In/Out Rehearsal

The Rehearse function allows you to practice manual punch in/out recording without
actually recording anything to disk. With the Auto Input monitoring function turned
on, playback and input monitor switching is performed automatically at the LAST REC
IN and OUT points. See "Monitoring" on page 42 for more information.
The following illustration shows the procedure for manual punch-in/out rehearsal.
1-1
2-1
READY 2
3-1
4-1
5-1
6-1
7-1
8-1
RECORD
READY
Use the [RECORD READY] buttons to select tracks for recording.
1
The corresponding READY indicators flash.
Press the [PLAY] button to start playback.
2
Playback starts and the PLAY button indicator lights up.
Press the [REHE] button to punch in.
3
Rehearsal starts, "REHEARSAL" appears on the display, and the REHE button indicator
and READY indicators light up continuously. The LAST REC IN point is set automat-
ically and its indicator lights up.
Press the [PLAY] button to punch out.
4
The D24 stops rehearsal and continues with normal playback. The LAST REC OUT
point is set automatically and its indicator lights up.
The REHE button indicator goes out and the READY indicators flash.
Press the [STOP] button to stop playback.
5
The PLAY button indicator goes out.
LAST REC IN
1
2
3
4
5
6
7
8
Play
PLAY
2

Manual Punch In/Out Rehearsal

LAST REC OUT
point point
Rehearse
PLAY
REHE
69
Play
STOP
D24—Owner's Manual