Deactivating/Activating Subscriber; Usim Is Displayed In A Table On The Epc Tab Screen - Motorola LXN 500 Installation, Configuration And Operations Manual

Click Add USIM to add another USIM to the LXN 500 or Clear to clear the current information
4.
displayed in the fields.
Result: The newly added USIM is displayed in the table on the EPC tab.

USIM is Displayed in a Table on the EPC Tab Screen

Figure 2-6
Turn off your mobile device, install the USIM card and turn on the mobile device.
5.
Refer to Provisioning the Mobile Device (UE) on page 45
6.
the LXN 500.

Deactivating/Activating Subscriber

The deactivation of a subscriber temporary deny service to that subscriber.
Perform this procedure to deactivate or activate a subscriber.
Procedure:
Sign in to the LXN 500 O&M Configuration site (See
1.
On the EPC screen, click the Off / On switch in the Active column of the relevant USIM.
2.
Send Feedback
Operation and Configuration
to set your mobile device to operate with
Signing In on page 20).
MN003563A01-B
25