Init (Program Initialization) - Yamaha A3000 Owner's Manual

INIT (Program Initialization)

Use this command page to initialize one or all programs.
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
Use this screen to initialize one or all memory-resident programs.
FYI
Initialization removes all sample assignments (sets all ToPgm switches to OFF), clears
all Easy Edit settings, and returns the EFFECT, SETUP, and CONTROL settings to the
initial values selected at the SETINIT page ( 104). (If you have not set any SETINIT
values, then EFFECT, SETUP, and CONTROL settings revert to their factory defaults)
Knob 1 Change Page
• Turn the knob to change to a different command page.
• Push the knob to execute program initialization. The A3000 then returns a confirma-
Type of Initialization = Pgm, AllPgm
Knob 2
Turn the knob to select whether to initialize all programs or only one program.
Pgm
AllPgm
Program
Knobs 3, 4
If you are initializing a single program only, turn either knob to select the program.
Note that this item does not appear if you are initializing all programs (if Type is set to
AllPgm).
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
tion screen. Push Knob 5 (>YES) to complete the initialization, or Knob 4 (>NO) to
cancel.
Initialize only the program selected by Knob 3 or 4.
Initialize all programs.
= 001,...,128
Press the COMMAND key, then turn Knob 1 to select >INIT.
Knob 3 Knob 4
- -
>INIT
Chapter 4
COMMAND Pages
Knob 5
-
-
PLAY Mode
101