Operation
5.4.4 Operation by an SD Memory Card
Operation of a project saved in an SD memory card
Insert an SD memory card, set the mode switch to "RUN", and set the card operation switch to
"CARD" to enable the operation of a project saved in the card.
Switch setting conditions
Switch
Mode switch
Card operation switch
Procedure
1. Power off the unit.
2. Attach an SD memory card that houses the auto execution file "autoexec.fp7" and the
comment file "comment.fp7", a project to be used for operation, to the CPU unit.
3. Set the card operation switch to "CARD".
4. Close the cover and power on the unit.
The auto execution file "autoexec.fp7" and the comment file "comment.fp7", a project
saved in the SD memory card, is transmitted to the execution memory RAM.
Transmission of the project takes place when the unit is powered on or the mode
switch is set to "RUN".
5-12
Setting
RUN
CARD