Saving To Sd Memory Card (In Sd Memory Card Operation) - Panasonic FP7 User Manual

Configuration

2.6.3 Saving to SD Memory Card (In SD Memory Card Operation)

 Overview
 To perfrom SD memroy card operation, write a file for automatic start in an SD memory card.
Create the setting file in the following procedure.
PROCEDURE
1. Create an "AUTO" folder in an SD memory card.
2. Select "Tool" > "SD Memory Card" > "Create Logging/Trace Settings Auto-
Run File" in the menu bar.
The "Create auto-run file" dialog box is displayed.
3. Select "Create new settings" and LOG numbers, and press the [Yes] button.
The "Browse Folders" dialog box is displayed.
4. Select a desired folder, and press the [Yes] button.
A logging/trace settings auto-run file "logtrc.fp7" is created.
5. Save the created file in the "AUTO" folder in the SD memory card.
6. Insert the SD memory card, in which the logging/trace settings auto-run file
"logtrc.fp7" is written together with the auto-run file "autoexec.fp7", into the
CPU unit.
7. Set the mode switch to the SD side, and execute the operation.
KEY POINTS

The logging/trace settings are saved in the non-volatile memory ROM1 in
the CPU unit as a part of project data. However, they are not saved in the
non-volatile memory ROM during the SD memory card operation.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
2-16