Table of Contents
Advertisement
3. SCSI MODEL HARDWARE INSTALLATION
3.1. Setup Flowchart for CRW2100SXZ (SCSI)
This flowchart shows the procedure for setting up your new Yamaha 3-in-1 SCSI drive. For
easy cross-referencing, the relevant pages in this manual are also provided.
Windows Users
STEP
Do you have a SCSI
1
adapter card?
Check that the SCSI adapter
STEP
card is correctly installed
2
Go to Control Panel | System | Device
Manager tab. Double-click on SCSI
controllers to check that the adapter
card is recognized correctly by the
computer's OS.
STEP
Set up the CRW2100SXZ drive
3
1. Set the switches at the rear of the drive
(Pages 10 & 11)
2. Connect the SCSI and power cabls,
then switch the dirve on (P.16-18).
STEP
Check that the CRW2100SXZ drive
4
is recognized correctly (p.18)
Go to Control Panel | System | Device
Manager tab. Double-click on CDROM to
check that the drive is recognized
correctly by the computer' OS.
STEP
Install the CD writing software
5
For details about how to install the
software, refer to the documentation
that came with it.
Start using the CRW2100SXZ
STEP
6
drive!
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
YES
Obtain a SCSI adapter card
STEP
Recommended models:
1-1
Adaptec AHA-2940-series (PCI)
NO
Iwill 2930 series (PCI)
STEP
Install the SCSI adapter card
1-2
Read this manual and insert the SCSI
card into the appropriate slot on
the computer.
7
IBM Compatible or
Macintosh Computers
Advertisement
Table of Contents
