Table of Contents
Advertisement
3. Double-click "YAMAHA CRW2100S" "CDROM" (in Windows 95/98/ME) and click the
Settings tab. Check the "Sync data transfer" checkbox. With "Sync data transfer"
enabled, the data transfer between your CRW2100SXZ drive and your computer is
synchronized, meaning that the maximum possible data transfer rate can be
achieved. Refer to the documentation that came with your SCSI card for further details.
Important Note: When using Windows NT4.0/2000, "Sync data transfer" will automatically be
selected if the SCSI adapter card supports this feature. You will not need to change this setnt.
4. Install the CD writing software.Refer to the documentation that came with the CD writing
software for further details.
3.6.2. Macintosh Users
To check that your new Yamaha drive is recognized correctly, you will need to use the
Apple System Profiler.
1. When your new drive and computer have powered up, install the CD writing
software.
Important Note: The installer simplifies the installation process. For details about how to install
the software, refer to the documentation that came with it.
2. Restart your computer.
3. Start your CD writing software.
4. Check that your new Yamaha drive is recognized correctly.
Important Note: For details on how to use the software, see the documentation that came with it.
Screen shot from Windows 98.
19
Advertisement
Table of Contents
