Advertisement
mentioned in the concerning subjects in this manual together with an indication if it is network
(NE) or local (LO) data. More information about these parameters can be found in the Second
Line Maintenance Manual.
The boundaries are assigned a value during the projecting of the unit via the PEuu.POM file.
When the value of a boundary, timer or option must be changed, this can be effected via a new
projecting with an adapted PEuu.POM file.
Most of the options and timers can be changed in an operational system using the second line
maintenance command EXSUBC sometimes activated by a hot-start. Boundaries can almost
never be changed in an operational system because a change in a boundary results in a new
partition of the CPU memory.
For more information: see Facility Implementation Manual; Networking and Routing.
5
Advertisement
