Page 1
Technical Support Setup Procedure FAQ : Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account Release date : 1/05/2012 Model Support : DCS-942L H/W:A1 S/W:1.xx FAQ: Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account – Version 1.00...
Page 7
ขั ้ น ตอนที ่ 9 : เลื อ กตั ว เลื อ ก Wired : I want to connect my camera through a cable (wired connection) FAQ: Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account – Version 1.00...
Page 8
ก่ อ นหน้ า นี ้ แ ล้ ว หรื อ เลื อ ก No , I need to sign up for a new account ถ้ า คุ ณ ไม่ ไ ด้ ล งทะเบี ย น mydlink มาก่ อ น คลิ ๊ ก บนปุ่ ม Next FAQ: Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account – Version 1.00...
-12- Technical Support Setup Procedure Step 1: Run the CD Set-Up that came with the DCS-942L. On the Set-Up Wizard screen click on the Start button. Step 2: Select the radio button on “No, my router does not have WPS Support”. Click on the Next button.
Page 13
Step 4: Connect the included Ethernet cable to the port on the DCS-942L camera. Connect the other end of the cable to an available LAN port on your router. Click Next button.
Page 14
-14- Step 5: Attached the power adapter to the power jack on the back of the DCS-942L camera, and connect the power adapter to a power outlet. Ensure that the Status LED on the front of the camera will turn green when the device is ready. Click Next button.
Page 15
Step 7: You will now see the camera device information with its corresponding IP Settings and MAC Address. Click on the Next button. Step 8: Please enter a password to secure you camera. Click on Next button when done. FAQ: Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account – Version 1.00...
Page 16
-16- Step 9: Select the radio button Wired: I want to connect my camera through a cable(wired connection) FAQ: Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account – Version 1.00...
Page 17
No, I need to sign up for a new account if you did not register in mydlink yet. Click on the Next button. Step 11: Set-up is Complete. Click on the Finish button. FAQ: Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account – Version 1.00...
Page 18
Step 13: Enter the E-Mail Address and the Password used to register on mydlink and then click on the Sign In button. Step 14: The image of the camera will now show up on the screen. FAQ: Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account – Version 1.00...
Page 19
-19- FAQ: Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account – Version 1.00...
Page 20
ภาษาอั ง กฤษ : เสาร์ , อาทิ ต ย์ , วั น หยุ ด นขั ต ฤกษ์ และ วั น ธรรมดา หลั ง 18.00 น. English : Sat – Sun , Public Holiday and after 18.00 weekday. Website : www.dlink.co.th email: support@dlink.com.sg Facebook : http://www.facebook.com/DLinkThailandFans FAQ: Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account – Version 1.00...
Page 21
-21- Nationwide D-Link Service Centres FAQ: Setup Wizard – Setting Up the DCS-942L WITH Existing mydlink Account – Version 1.00...