D-Link DCS-942L Manual
Hide thumbs
Also See for DCS-942L:
- Quick installation manual (80 pages) ,
- User manual (72 pages) ,
- Faq (58 pages)
Advertisement
Quick Links
How to connect the DCS-942L wirelessly
This document will detail how to change the DCS-942L configuration to be connecting
wirelessly to your Wireless Access Point, without having to run through the Setup Utility
again.
Ensuring the firmware remains up to date can assist with functionality / improved
performances as well as adding additional features.
D-Link Technical
Support – How to connect the DCS-942L wirelessly.
Page 1 of 8
Advertisement
Related Manuals for D-Link DCS-942L
Summary of Contents for D-Link DCS-942L
- Page 1 How to connect the DCS-942L wirelessly This document will detail how to change the DCS-942L configuration to be connecting wirelessly to your Wireless Access Point, without having to run through the Setup Utility again. Ensuring the firmware remains up to date can assist with functionality / improved performances as well as adding additional features.
- Page 2 "Wired" configuration. It's therefore assumed that your DCS-942L is connected using an Ethernet cable. Continue reading to change this configuration to be connecting wirelessly instead. 1. You will need to know the IP Address of your DCS-942L. There are two ways in which this can be done. Setup Utility: Run through the Setup Utility selecting the default options until you get to a heading "First, select your...
- Page 3 2. Now we know the assigned IP Address, please type your IP Address into your Internet Browser, then press Enter or Go: 3. You will need to login with your username and password that you assigned to your DCS-942L during the Setup Utility process: D-Link Technical Support –...
- Page 4 4. When you have successfully accessed the DCS-942L Web Configuration you will see a similar illustration on your Internet Browser as the below illustration: NOTE: Your Live Video results may differ. 5. Click on the Setup menu, followed by clicking on the Wireless Setup heading, then click the Enable...
- Page 5 6. Patiently wait for the countdown, do not disconnect any Ethernet cables: 7. Now we configure the DCS-942L Wireless Configuration with the details of our Wireless Access Point: D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 5 of 8...
- Page 6 8. Click on the Site Survey drop down arrow and select the Wireless name or SSID that you want to connect D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 6 of 8...
- Page 7 9. Now type in your wireless password into the Key field, then click on the Save Settings button: 10. Patiently wait for the countdown, do not disconnect any Ethernet cables: D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 7 of 8...
- Page 8 11. Check the rear panel of the DCS-942L and ensure that the power LED is green, provided it is green you may now disconnect the Ethernet cable from the rear panel of your DCS-942L. NOTE: When you disconnect the Ethernet cable the power LED will turn red, then come green again within a few seconds.