Start Up - GE Panda iRes Warmer Operation And Maintenance Manual

Start up

Panda iRes Warmer M1110737 006
Operating the Warmer
Illustration
© 2007 General Electric Company, all rights reserved
Description
Step
1 Plug the unit into a properly rated AC power
outlet and set the caster brakes.
2 Place the mains power switch, located by
the outlets on the back of the unit, in the
"On" (I) position.
3 Place the power Stand By switch, located
on the left side of the controller, in the On (I)
position. Check the control panel to ensure
the screen is working properly.
(continued)
3-3