Honeywell HON 512 User And Maintenance Manual page 49

Final checks
Next task
HON 512 with HON 650 pilot user manual
Proceed as follows:
Figure
Conduct a final inspection to check whether the following criteria are met:
▪ All threaded joints on the connection lines have been checked to ensure that they have
a secure fit.
▪ All electrical connections are securely fastened / clamped and fused.
If ...
at least one criterion is not met
all criteria are met
Proceed as follows:
Checking the system for leaks (see page 50)
Transport, installation and start-up
Step Description
1 Connect the electrical displacement
transducer (optional) to position (1) on the
actuator assembly as per the technical
specifications in the appendix (see page
152) in these operating instructions.
then ...
you should correct the error before proceeding
with the next task.
you may proceed with the next task.
49