Philips 4500i Series Quick Start Manual

O2 LE DI _CEE_EN
Connectivity
You can use the app to control the puri er and check
air quality. Download and install the Philips app
Clean Home+
Open the app and click on "Connect a New Device"
or press the "+" button to connect your device.
Please follow the steps in the app.
Control
Power Light Auto
on/o mode
Auto general mode
Auto pollution mode
Auto gas mode
Auto allergen mode
Display
Sleep
Speed 1
mode
Child WiFi
lock indicator
Gas Indoor allergen PM2.5
indicator index indicator
Gas index Allergen index
from L1-L4, 1-12, 1 indicates
L1 indicates best air quality
best air quality
Fan Child Filter
speed lock reset
Hold for
Sleep
3 seconds
Speed 1~2
Turbo
Turbo
Speed 2
speed
Filter replacement Pre- lter
alert clean alert
3-digit display
Air quality
PM2.5 /
ring
Gas / IAI
Good Fair Poor Very poor
Maintenance
1
1
4
3
2
NanoProtect lter
Pre- lter
2 3
Active Carbon
When display shows F0
Time to clean the pre- lter
When display shows A5 When display shows C7
Time to replace NanoProtect lter Time to replace NanoProtect lter
Active Carbon
Series 3
! Press for 3 seconds to reset after cleaning or replacing accessory
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the lter.
90x127mm
4
NanoProtect lter Series 3
1
2
4241 211 04782-1