Pairing The Rsm To The Radio; Pairing The Rsm Through Bluetooth; Pairing The Rsm Through Nfc; Unpairing The Rsm - Motorola WM500 PMMN4127 Installation Manual

MN006126A01-AA
Chapter 6: Maintenance
Alternatively, scan the following QR Code:
6.2

Pairing the RSM to the Radio

Pairing the RSM through Bluetooth

Procedure:
1 While RSM is power off, press and hold the Power button until the "Power On" voice prompt
follows by "Searching for Host" voice prompt is played and blue LED blinks.
2 From the compatible device, search and select "WM500" from the Bluetooth list.
3 Once the devices are paired successfully, a "Pairing Successful" tone is played.
4 A voice prompt from the RSM indicates that the device is "Connected".
5 Choose RSM from the Bluetooth list and pair again for second time (This is for iPhones only).

Pairing the RSM through NFC

Procedure:
1 While RSM is power off, press and hold the Power button until the "Power On" voice prompt
follows by "Searching for Host" voice prompt is played and blue LED blinks.
2 Align the NFC locations on both the RSM and the compatible devices.
3 Check the compatible device for indication of successful pairing.

Unpairing the RSM

Procedure:
1 While RSM is power off, press and hold the Power button and PTT buttons.
2 The blue LED blinks and a voice prompt from the RSM indicates that the paired device is
"Cleared".
6.3

Replacing the Battery

Prerequisites:
WARNING:
• Before you start the dismantling procedure, power off the RSM.
• Wear an appropriate electrostatic discharge (ESD) protection device.
Procedure:
1 Open the USB dust cover.
16
.