Pairing The Rsm To The Radio; Pairing The Rsm Through Bluetooth; Pairing The Rsm Through Nfc; Unpairing The Rsm - Motorola WM500 User Manual

MN006538A01-AA
Chapter 2: Getting Started
Button
Volume -
2.1

Pairing the RSM to the Radio

Pairing the RSM through Bluetooth

Procedure:
1 While RSM is power off, press and hold the Power button until the "Power On" voice prompt
follows by "Searching for Host" voice prompt is played and blue LED blinks.
2 From the compatible device, search and select "WM500" from the Bluetooth list.
3 Once the devices are paired successfully, a "Pairing Successful" tone is played.
4 A voice prompt from the RSM indicates that the device is "Connected".
5 Choose RSM from the Bluetooth list and pair again for second time (This is for iPhones only).

Pairing the RSM through NFC

Procedure:
1 While RSM is power off, press and hold the Power button until the "Power On" voice prompt
follows by "Searching for Host" voice prompt is played and blue LED blinks.
2 Align the NFC locations on both the RSM and the compatible devices.
3 Check the compatible device for indication of successful pairing.

Unpairing the RSM

Procedure:
1 While RSM is power off, press and hold the Power button and PTT buttons.
2 The blue LED blinks and a voice prompt from the RSM indicates that the paired device is
"Cleared".
14
State Short
Press
Voice Prompt/ Unmute Voice Prompt/Tone
Tone Muted
Connected Decrease
volume by
one step
Voice Prompt/ Mute Voice Prompt/Tone
Tone Unmuted
and At Minimum
Volume
Long Very Long Press (>3s)
Press
(>1.5s)
Volume Ramp Down