Advertisement
3
Connect Gateway to home internet router
4
Bind Gateway to Zone-1 Thermostat
Press
1sec
1
Put Gateway into BIND
mode by pressing BIND
button on base.
bn
d
3
Send BIND signal by pressing
BIND button again.
5
5
Zone-1 Thermostat will display binding confirmation
+ signal strength (5 = good signal) for a few seconds
before returning to normal operation.
Note: The Gateway cannot indicate how many Thermostats are connected
to it. This can be checked by the number of zones displayed on the
Smartphone App after the Gateway has been registered in the next step.
Continue to step
2
Press
once
4
few
secs
21
.5
Repeat this process for binding
Zone-2 Thermostat to the Gateway
bn
d
Press
10sec
Put Zone-1 Thermostat into
BIND mode by pressing
below and right of display.
LED on Gateway should turn
solid green (= good signal).
on the next page...
5
Advertisement
