Download Print this page

Honeywell 290092 Manual

Wireless network master wifi

Advertisement

Available languages

Available languages

Quick Links

Dimensional drawings:
Installation:
The Wireless Network Master WiFi is the master (Gateway) device of the wireless network. It transfers the
received data from the PC Software to the wireless network and vice versa. One only Network Master can exist
in every wireless network. It is recommended that the Wireless Network Master WiFi is positioned at a central
point of the entire wireless luminaire network installation. At least 2 or 3 luminaires should be inside the signal
range of the Gateway in order to create alternative routes for re-transmitting messages to other devices inside
their own range. Install the device to a stable and visible position which has access to mains power and WiFi
network. Avoid metallic surfaces, as they can affect RF signal strength. It is recommended that while fitted, the
LED indications are visible to a technician. Use the 2 mounting holes to fit the base on a vertical wall
(concrete/brick/wood) and the embedded spirit level to make fine (horizontal) adjustments. Tighten the
mounting screws when done. Connect mains voltage (L and N).
Note:
This device is powered from the mains, so in case of mains interruption it will stop working. If your wireless
network needs to be "alive" during mains interruption, care should be taken so that the device is powered by a
UPS system.
Function
This device has three indication LEDs:
Power ON LED (green). Lit when the device is activated.
RF LED (yellow). On when there is at least one device connected to the Gateway and there is traffic over
the network. Off when the network is empty.
Signal broadcasting LED (yellow): Flashing indicates Gateway transmissions (beacon).
Button functions, BT1 (accessible when front cover is removed):
Short press (<1 sec.): Send status message to the PC software
Long press (between 1 and 10 secs.): Reset Gateway
Extended press (>10 secs.): Load default setting to the Gateway
Button functions, BT2 (accessible when front cover is removed, see fig. 1):
Long press (2 secs.): Establish Mini Access Point (TELA WiFi), LED7 2 blinks/sec.
At the end of their useful life the
packaging and product should be
disposed of via a suitable
recycling centre. Do not dispose
of with your normal household
waste. Do not burn.
Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway
Wireless
Network Master WiFi
Technical description
Part no.:
Operation voltage:
Maximum power consumption: 1.4VA
Ambient temperature range:
Relative humidity:
Weight:
IP20
Default settings Gateway:
290092
200-240VAC 50-60Hz
5 to 40°C
Up to 95%
193g
SID: 00000001
Channel 13 (869.525MHz)
Techn. menu code (webserver): 1000
Mini Access Point Gateway IP: 192.168.0.50
http://www.hls-nordic.com
GB

Advertisement

loading

Summary of Contents for Honeywell 290092

  • Page 1 SID: 00000001 recycling centre. Do not dispose of with your normal household Channel 13 (869.525MHz) waste. Do not burn. Techn. menu code (webserver): 1000 Mini Access Point Gateway IP: 192.168.0.50 Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway http://www.hls-nordic.com...
  • Page 2 Setup connection via Mini Access Point: Open the front cover. Press for 2 seconds the button BT2 on the left part of the PCB (see fig. 1). The 290092 will now establish a temporary mini WiFi AP (access point), named as “TELA WiFi” without security (LED7 2 blinks/sec, see fig.
  • Page 3 Fabrikkinnstillinger Gateway: SID: 00000001 leveres til gjenvinning. Ikke brenn Kanal 13 (869.525MHz) disse eller kast sammen med husholdningsavfallet. Teknikerkode (web-server): 1000 Mini Access Point Gateway IP: 192.168.0.50 Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway http://www.hls-nordic.com...
  • Page 4 Oppsett-tilkobling - mini AP metode: Åpne frontdekslet på 290092. Trykk knappen BT2 i 2 sek. (venstre side av kretskortet, se fig. 1). 290092 vil nå opprette et midlertidig mini WiFi AP (aksesspunkt), kalt “TELA WiFi” uten sikkerhet (LED7 2 blink/sek, se fig. 1).
  • Page 5: Installation

    Standardinställningar Gateway: SID: 00000001 längre används, ska dessa Kanal 13 (869.525MHz) återvinnas. Får ej brännas eller Tekniker kod (webbserver): 1000 kastas tillsammans med hushållsavfall. Mini Access Point Gateway IP: 192.168.0.50 Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway http://www.hls-nordic.com...
  • Page 6 Tillämpa inställningen ovan genom att klicka på “Push” knappen. När 290092 är konfigurerad kommer mini WiFi AP bli avslutad och ansluta sig till WiFi Nätverket (LED7 1 blink/sek, se fig. 1). Detta kan ta några sekunder.