Samsung OfficeServ 7100 Technical Manual page 26

OfficeServ 7100
TECHNICAL MANUAL
3) Press and lock the lever to fully insert.
3.3.2 Replacing Cards
Removing Cables
Replace a card after removing all cables connected to the card.
The procedure for replacing a card is as follows:
POWER TO THE CABINET MUST BE TURNED OFF BEFOE REMOVING
CARDS. Failure to do so will damage the card, cabinet and/or corrupt the data
moving along the data bus.
1) Turn off system power using the power switch in the back of the system.
Figure 3.9 Inserting Interface Card into Slot 1/2
Figure 3.10 Turning the Cabinet Power Off
3.9
Table of Contents
Home Page
INSTALLATION
PART 3 APRIL 2007