Siemens SINUMERIK 828D Manual page 4

0
0 Introduction
Edition history, trademarks
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Remarks" column:
A .... New documentation.
B .... Unrevised reprint with new order number.
C .... Revised version with new edition status.
Trademarks
All product designations may be trademarks or product names of Siemens AG or supplier
companies whose use by third parties for their own purposes could violate the rights of the owners.
4
Introduction
Edition history, trademarks
SINUMERIK® documentation
Edition Order no.
09.2018 6FC5095-0AB10-0BP5
06.2016 6FC5095-0AB10-0BP4
09.2013 6FC5095-0AB10-0BP3
09.2011 6FC5095-0AB10-0BP2
05.2009 6FC5095-0AB10-0BP1
More information is available on the Internet at:
http://www.siemens.com/sinumerik
This document was created using a number of
layout and graphic tools.
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or
design, are reserved.
© Siemens AG 2009 - 2018. All rights reserved.
Order no. 6FC5095-0AB10-0BP5
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
Remark
C
C
C
C
A
Other functions not described in this documentation might be
executable in the control. This does not, however, represent
an obligation to supply such functions with a new control or
when servicing.
We have checked that the contents of this document
correspond to the hardware and software described.
Nonetheless, differences might exist and therefore we cannot
guarantee that they are completely identical. Nevertheless,
the information contained in this document is reviewed
regularly and any necessary changes will be included in
subsequent editions. Suggestions for improvement are
welcome.
Technical data subject to change.
Siemens AG