Operation Procedure - Hitachi J300 Series Instruction Manual

Th. slandard type digital operator is modified so as to
.pe.ations. Data can be set simply.
be used easily by minimizing key
\rmes of Parts
FUNC (Function) key
Tbis key is used for changing
Jommands. When pressing
\ey after setting dala and
pffamctcr, they arc automati-
callymemoriz€d.
Monitor (LED display)
This display shows frequency, motor
cunent. motor revolution speed, and
Trip history
POWER Lamp
Power lamp of control
Up key, Down key
Thcse kcys are used to
change data and increase
or decrease th€ frequency.
RUN key
This key is used for starting. (Wlcn
terminal mn is sclccled, this key does
sroz#sar tey
This key is used forstopping the motor or
(W}len eithcr opemtor or terminal is se-
lected, ihis key works. If$eerrension
function is used, *ris tunction is void.)
ll\ wARNtNG
The STOP/RESET key wo*s only when a function is ser heparc an cmergency swirch separarely.
Tbe use of the STOP/RESET kcy as an emergency swirch nmy causc an injury.
-j
Operation Procedure
(Example that the frequency is set and the equipment starts running)
)rsplay afier
rrser is tumcd Press the
n k€y once.
tidrE l
Press thellu]Jll key once
and set the frequency by using
the
E
andEkeys.
Press the E
key five times.
is
w}len sclccrine de monit-
"."..
E+;l
mode. eress
E!
andE
-""1
FUN
The frequency which is
ser ty the ffi
key is
to aisptuy lTT El.