Seat Adjustment - Horizon Fitness Saxon Owner's Manual

Only ever use the Horizon approved charger supplied with your vehicle.
Do not interrupt the charging cycle of your charger.
Fig. 12
Charge your batteries every night regardless of the amount of use your vehicle
has had during the day. Keeping your batteries topped up will extend their life
and ensure the vehicle achieves desired range performance .
Do not top up your batteries during the day, wait until you have finished with the
vehicle for the day or the evening then leave them charging overnight for a full
charge.
If you are not using your Saxon today leave it connected to the charger until
required. Leave the charger switched on, this will not damage your batteries as
long as the mains connection is left switched on and will only use what power the
batteries require to remain topped us as the charger is fully automatic. Turning
the mains connection off will begin discharging the batteries and could eventually
shorten their life or cause them damage.
If you leave your vehicle for an extended period of time (more than a week)
disconnect at least one main battery terminal (the grey two pin connectors under
the rear battery cover). If leaving your vehicle for a long time, once a month plug
your batteries back in and leave on charge until fully charged, remember to
unplug the batteries once again once charged.
Failure to recharge your batteries will damage them and lead to shortened
lifespan and performance or permanent failure.
23
Assembly and adjustments of your Saxon
Seat removal and replacement
Depending on seat option fitted operate the seat back adjustment lever by pulling
upwards and while holding lever up fold the seat back down.
Operate the seat swivel lever on the side of the seat and turn the seat so that it
turns freely (not locked).
Fig. 4
Grasp the sides of the seat and pull upwards until clear of the vehicle seat post.
To put the seat back on the vehicle grasp the seat on either side then carefully
line up the socket in the top of the vehicle seat post with the seat spigot. Raise
the seat to the vertical position; it should now drop into place. If it is slightly stiff
and doesn't drop into place turn the seat while pressing down on the seat of the
cushion until the seat locks into place.
Always ensure that the seat has locked into place by trying to turn the seat before
attempting to drive the vehicle.

Seat adjustment

Your Saxon has been designed so that the seat is adjustable for both height and
reach to ensure you are in the safest and most comfortable position when operat-
ing your vehicle.
Always adjust the seat to a suitable driving position as far forward on the vehicle
as is comfortable to do so rather than brining the steering column back to enable
you to reach as this will make steering slightly more difficult and reduce vehicle
stability.
8