Preparing For Use; Inserting The Cartridge; Removing The Cartridge - Philips Perfective AQUARIUS HV-SOLG-FU Instructions Manual

Preparing for use

Inserting and removing the cartridge

Inserting the cartridge

C
1 Remove the rubber seal from the cartridge
completely.
C
2 Insert the cartridge into the cartridge
compartment by pressing it firmly until
you hear a click.
Make sure the compartment is dry before you
insert the cartridge.
After you have inserted a new cartridge, some
foam may come out of the spray nozzle during
the first few seconds of spraying.

Removing the cartridge

When the cartridge is empty, remove and
discard it and replace it with a new cartridge.
When the cartridge and/or the water tank is
B
empty, you will hear a pumping sound and some
foam will come out of the spray nozzle.This is a
signal that the cartridge needs to be replaced
and/or the water tank needs to be refilled.
If this happens, stop pressing the spray button
immediately.
ENGLISH
9