Table of Contents
Advertisement
The iron may give off some smoke when you use it for the first time.This
B
will cease after a short while.
Preparing for use
Filling the water tank
Never immerse the iron in water.
1
Make sure the appliance is unplugged.
C
2
Set the steam control to position 0 (= no steam).
3
Open the cap of the filling opening.
4
Tilt the iron backwards.
C
5
Fill the water tank with tap water up to the maximum level by
means of the filling cup.
Do not fill the tank beyond the MAX indication.
If the tap water in your area is very hard, we advise you to mix it
with an equal amount of distilled water or to use distilled water
only.
Do not put additives, vinegar, starch or chemically descaled water in the
water tank.
C
6
Close the cap of the filling opening.You will hear a click.
Setting the temperature
C
1
Remove the heat-resistant protective cover.
Do not leave the heat-resistant protective cover on the soleplate
during ironing.
2
Put the iron on its heel.
3
Put the mains plug in the earthed wall socket.
ENGLISH
5
Advertisement
Table of Contents
