Dell D2020H User Manual page 34

NOTE: Your monitor has a built-in feature to automatically
calibrate the brightness to compensate for LED aging.
Before the DDC/CI function is disabled, the following message is displayed.
When the monitor enters Power Save Mode, the following message appears.
If VGA or HDMI cable is not connected, a oating dialog box as shown below
appears. The monitor will enter Power Save Mode after 4 minutes if left in this state.
See Troubleshooting
|
34 Operating your monitor
Dell 20 Monitor
The function of adjusting display setting using PC application
will be disabled.
Do you wish to disable DDC/CI function?
Yes
Dell 20 Monitor
Entering Power Save Mode.
Dell 20 Monitor
?
No VGA Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/D2020H
for more information.
No
D2020H
D2020H
D2020H