Work Area Safety - RIDGID 300 Safety Procedures

Doc # 18.47.1 – Ridgid 300 Safety Procedures
4. PERSONAL PROTECTIVE EQUIPMENT
Safety glasses must be worn at all times in work area!
Long and Loose hair must be contained by a hat or hairnet to prevent contact with
moving parts on equipment and machines
Work Boots must be worn at all times when working in an area where there is risk of
serious foot injury due materials falling onto the foot.
Work Gloves should be worn when there is a risk of hand injury during the course of
work tasks.
Hard hats must be worn when working in an environment where there is a risk of
objects falling from above or where there is a high risk of striking your head on
objects.
Close fitting clothing or protective clothing must be worn.

Work Area Safety

5.
• Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, and dusts. Tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a tool. Distractions can
cause you to lose control.
• Keep floors dry and free of slippery materials such as oil. Slippery floors invite accidents.
Printed copies of this document are uncontrolled
Page 2 of 11
Date: 12/22/2014
.