Trunk Setting (Cm05/Cm10/Cm30) - NEC UNIVERGE SV8300 Pc Programming Manual

Trunk Setting (CM05/CM10/CM30)

Register a trunk line blade and configure relevant trunk data.
STEP1: Click the [7] button in the [Quick Setup] screen.
The [7. Setting of Trunk] screen is displayed in the work window.
STEP2: (2) Right-click the slot of the trunk line blade to be registered in the Blade Display Area.
Right-click menu is displayed.
(1)
(2)
Right-click menu
[OK] button
No. Item
(1) [Zoom In] button
(2) Blade Display Area
Click to display a preferences screen for the blade selected in the Blade
Display Area.
Displays slot configuration of the SV8300. Registers the trunk line
blades mounted in the SV8300.
4-20
Chapter 4 Standard Mode
Description
[Implement] Category
NWA-033628-001 Rev.1.0