NEC UNIVERGE SV8300 Pc Programming Manual page 64

No. Item
(1) [Fill In] button
(2) [Clear] button
(3) System Port No.
Data Setup field
Area
STN No.
field
TN No.
field
RSC
(Day)/
(Night)
field
SFC (A)/
(B)/(C)
field
Name Dis-
play field
Click to apply the settings entered on the selected line to other
lines as well. For the operating instructions, see "Using the [Fill
In] button". Page 4-19
• STN No. field
Station numbers are assigned in sequence starting from the one
on the selected line. In all cases duplicate station numbers are
assigned in sequence.
* Numbers containing * or # cannot be set. Before the starting
digit of a station number changes, automatic entry stops with
the preceding station number (example: 3999).
* "F" is automatically added even if the station number that "F"
is not added to the lead of station number is entered.
• TN No, RSC (Day)/ (Night) and SFC (A)/ (B)/ (C) fields
The same values as appearing on the first line are set.
• Port No. and Name Display fields
Out of the scope of continuous entry.
Click to initialize the settings to their defaults.
Displays the number of the port that houses the IP Station.
Enter a station number associated with the port number (0000 to
1023) according to the numbering plan setting.
• Up to 8 digits [0 to 9, *, #, blank field]
Select a station tenant number.
• 00 to 63 (default: 01)
Select the trunk restriction class of each station:
• Unrestricted (RCA)/Non-Restricted 1 (RCB)/Non-Restricted 2
(RCC)/Semi-Restricted 1 (RCD)/Semi-Restricted 2 (RCE)/
Restricted 1 (RCF)/Restricted 2 (RCG)/Fully-Restricted (RCH)
(default: Unrestricted (RCA))
Select the service restriction class A, B or C of each station.
• 00 to 15 (default: 15)
Enter a station name displayed on LCD of the IP Station. (default:
blank)
• Up to 16 characters
4-18
Chapter 4 Standard Mode
Description
[Implement] Category
NWA-033628-001 Rev.1.0