Honeywell Searchzone Sonik Quick Start Manual page 7

User Configurable Options
Refer to Mobile App section of Technical Manual for instructions on how to adjust the options.
The list of user configurable options:
1. Detector ID
2. Operation mode
3. Algorithm mode
4. Inhibit level
5. Alarm set point
6. Warning level
7. Fault level
8. Over-range level
9. Alarm 1 level
10. Alarm 2 level
11. Alarm delay
12. Proof test interval
13. LED mode
14. LED intensity
15. Inhibit timeout period
16. Set access code
Status Signalling
Searchzone Sonik is equipped with a high visibility LED status indicator.
Refer to Operation section of Technical Manual for more information.
WARNING
LED status indicator behaviour is configurable. If LED status indicator is
configured differently from the default setting, it may indicate states different to
other outputs.
Mode without Colour
Bluetooth
connected
Fault Yellow
Inhibit Yellow
Warning Yellow
Normal Green
Normal Green
Normal None
Alarm Red
Over-range Red
17. Normal level
18. Alarm latch
19. Loop current mode
20. HART poll address
21. Fault relay
22. Alarm 1 relay
23. Alarm 2 relay
Flashing Default Scheme
Yes Default
No Default
Yes Default
No Default
Yes Optional
No Optional
Yes Default
Yes Default
7