Panasonic PV-D4763S Operating Instructions Manual page 57

*Important: If a remote control button does not work when pressed,
Test Signal Setup
This feature assists in the setting of
OUTPUT BALANCE. Starting with (L) front
speaker, a test sound is output in clockwise
order. While the test signal is output, adjust
the output of the center speaker and
Surround speaker (R/L).
(See "OUTPUT BALANCE." P. 56.)
1
Do steps 1~2 of "Output
Balance Setup" on page 56.
2
OUTPUT BALANCE
CENTER : 0dB
SURROUND(R) : 0dB
SURROUND(L) : 0dB
SUBWOOFER : 0dB
TEST SIGNAL TEST SIGNAL : OFF : OFF
SELECT :
SET : SET
END : ACTION
No sound will come from the subwoofer.
Adjust as desired when playing a disc.
While the TEST SIGNAL is output, if the
setting change in the OUTPUT BALANCE (p.
56) is under 2 seconds, the output will switch
to the next speaker. The speaker name from
which the TEST SIGNAL is currently being
output is displayed.
(Example; "TEST SIGNAL : CENTER")
2sec
OFF FRONT(L)
2sec
SURROUND(L)
3
Press ACTION four times to exit.
FRONT(L)
B1
CENTER
Listening
position
SURROUND(L)
<Speaker Position>
TV Mode
Example
press the DVD button on the remote and try the button again.
Press
to select "TEST
SIGNAL," and
press SET .
(See below.)
2sec
CENTER FRONT(R)
2sec
SURROUND(R)
2sec
FRONT(R)
SUBWOOFER
SURROUND(R)
C1
[Pan & Scan (Factory preset)]
Still Mode
Set to reduce jitter in a displayed still picture or a motion
picture.
1
Press ACTION
to display DVD MAIN MENU.
2
DVD MAIN MENU
DISC LANGUAGES
AUDIO OUTPUT
ST I T I L L L L MODE MODE : AUTO : AUTO
TV MODE : 4 : 3 L e t t e r b o x
P A R E N T A L L O C K : L E V E L 8
SELECT :
SET : SET
END : ACTION
AUTO: "FIELD" (Field still) or "FRAME" (Frame still) is
automatically selected during the still mode.
(Factory preset)
FIELD: "FIELD" (Field still) is always selected.
This setting will reduce jitter when compared
with "AUTO" on some discs.
FRAME: "FRAME" (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with "AUTO" on some discs.
3
Press ACTION
to exit this mode.
TV Mode
Set the screen display style for wide-screen video
material playback.
1
Press ACTION
to display DVD MAIN MENU.
2
DVD MAIN MENU
DISC LANGUAGES
AUDIO OUTPUT
ST I L L MODE : AUTO
TV MODE : 4 : 3 L e t t e r b o x
P A R E N T A L L O C K : L E V E L 8
SELECT :
SET : SET
END : ACTION
4:3 Pan & Scan (Factory preset) :
Wide-screen video data is played in
Pan & Scan style (left and right of screen
is trimmed.)
• Video data not formatted in Pan & Scan
will play in letterbox style.
4:3 Letterbox :
Wide-screen video data is played in
Letterbox style (top and bottom of screen
has black margin).
16:9 :
Set "16:9" when using Wide-screen TV.
3
Press ACTION
to exit this mode.
Press
to select "STILL MODE,"
and
press SET repeatedly
for mode. (See below.)
Press to select "TV
MODE," and press SET
repeatedly for
mode.
(See below.)
[Letterbox]
57