Panasonic PV-D4735 Operating Instructions Manual

Panasonic PV-D4735 Operating Instructions Manual

Dvd/vcr deck

Advertisement

Connections and Initial Setup Procedures are on pages 12 to 17.
E
As an
NERGY
America has determined that this product or product model meets the
E
S
NERGY
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Operating Instructions

Model No.
MULTI FORMAT PLAYBACK
*
Ability to play back may depend on recording conditions.
S
®
TAR
Partner, Panasonic Corporation of North
®
TAR
guidelines for energy efficiency.
DVD/VCR DECK
PV-D4735S

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic PV-D4735

  • Page 1: Operating Instructions

    Please save this manual. Spanish Quick Use Guide is included. (Guía para rápida consulta en español está incluida.) For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo DVD/VCR DECK Operating Instructions PV-D4735S Model No.
  • Page 2: Important Safeguards And Precautions

    Important Safeguards and Precautions TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, INJURY TO PERSONS OR DAMAGE TO THIS PRODUCT, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON THE PRODUCT. INSTALLATION 1 POWER SOURCE CAUTION Operate only from a power source indicated on the unit or in this manual.
  • Page 3 Safety Precautions/Mesures de sécurité To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To prevent electric shock, match wide blade of plug to wide slot, fully insert. AVERTISSEMENT: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas exposer cet appareil à...
  • Page 4: Before Using

    40 Minutes 6 Hours 8 Hours (Super Long Play) For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Head Cleaning Playing older or damaged tapes may eventually cause video heads to become clogged. Video Head Clog Sensor During playback, this screen appears if clogging is detected.
  • Page 5: Table Of Contents

    Table of Contents Initial Setup (Connection) DVD / VCR Important Safeguards and Precautions ... 2, 3 Before Using ... 4 DECK & Cassette Information ... 6 , 7 Location of Controls ... 8 ~ 10 On Screen Displays / Light-up Indicators ... 11 Connections ...
  • Page 6: Deck & Cassette Information

    • It may not be possible to play CD-R, CD-RW, DVD-R and DVD-RAM in all cases due to the type of disc or condition of the recording. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo DVD-RAM discs DVD-RAM discs must meet the following conditions for this unit to be able to play them.
  • Page 7: Specifications

    Specifications Power Source: 120 V AC, 60 Hz Power Consumption: Power On: Approx. 22 watts, Power Off: Approx. 0.9 watts Video Signal: EIA Standard NTSC color Video Recording System: 4 rotary heads helical scanning system Audio Track: 1 track (Normal), 2 channel (Hi-Fi Audio Sound) Tuner Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69...
  • Page 8: Location Of Controls

    EJECT button: When this button is pressed in VCR mode, the tape is ejected. This button is inoperative if pressed during recording. If pressed in DVD mode, the disc tray opens or closes. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Others VCR/TV p.
  • Page 9 Front View of DECK Bold: VCR Function Italic : DVD Function Bold Italic : VCR and DVD Functions Normal: Others PLAY p. 20 STOP/EJECT p. 20 Cassette POWER Compartment Audio/Video Input Connector 2 (LINE 2) p. 35 p. 21 CHANNEL TRACKING/V-LOCK pp.
  • Page 10 Connect the Video Output or S-Video Output connector (see p. 12, 13) and set PROGRESSIVE OUT to “OFF” in the DVD Main Menu. (See p. 55.) For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Bold:...
  • Page 11: On Screen Displays / Light-Up Indicators

    On Screen Displays / Light-up Indicators On Screen Displays (VCR) Function & Channel Displays When a function button is pressed, e.g. PLAY, or you change channels, and also if a cassette is inserted, a 5-second display appears. VCR Status & Clock Displays To display or remove Cassette inserted screen shown at right,...
  • Page 12: Connections

    For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo (supplied) or an AV Cable ■...
  • Page 13: Other Connections

    Other Connections ■ ■ ■ ■ ■ With a Cable Box (DECK DVD/VCR DECK ANT or CATV IN FROM ANT. IN 1 Cable Box VHF/UHF OUT TO TV ■ ■ ■ ■ ■ Connect With Two Cable Boxes DVD/VCR DECK IN 1 Cable Box CATV...
  • Page 14: Audio Connections

    • If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1 channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. For information on Panasonic or Technics Dolby Pro Logic Surround Sound Decoders please contact your local dealer.
  • Page 15 ■ Connecting Amplifier (5.1 ch Surround system) [Digital connection] DECK Dolby Digital Decoder Amplifier Speaker DECK DTS (Digital Theater Systems) Decoder Amplifier Speaker When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream or DTS bitstream is output from the DECK OPTICAL digital audio output connector. When DECK is connected to a Dolby Digital decoder or DTS decoder, you can enjoy theater-quality audio in your home.
  • Page 16: Initial Setup For Basic Connections (Ready To Play)

    3, try switching it to channel 4. • To change VCR’s output channel, please see “VCR’s Output Channel” on page 19. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo AV Cable Connection on page 12.
  • Page 17 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. EJECT ACTION SELECT Manual Clock Set If Auto Clock Set was incomplete. STOP/EJECT Settings are made automatically. When complete, this screen appears.
  • Page 18: Reset Language, Channels, Clock, Vcr's Output Channel

    For Spanish For French For English 3) Press ACTION to exit. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo • PROGRAM functions are not available Press ACTION* when using COMPONENT Video Output to display MENU.
  • Page 19: Time Zone Adjust

    VCR’s Output Channel *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Time Zone Adjust VCR’s Output Channel (Only when Auto Clock is set.) 1) Press to select 1) Press “SET CLOCK,”...
  • Page 20: Playback/ Record On A Tape

    Press REW/SLOW- or FF/SLOW+ in Stop mode to rewind or fast forward a tape. Press EJECT on remote, or STOP/EJECT on DECK to eject a tape. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo EJECT VCR/TV SLOW+...
  • Page 21 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Record on a Tape Insert a tape with a record tab (p. 6). • DECK power comes on. If Auto VCR/TV (see p. 34) is set to “OFF,”...
  • Page 22: Basic Dvd Operation

    Particular scenes or information can be interactively selected from a menu that appears on the screen. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Press DVD to select DVD mode. • The DVD mode Light-up Indicator lights on DECK.
  • Page 23: Resume Function

    *Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. ■ Forward/Reverse Scene Search Press FF/SLOW+ or REW/SLOW- during play. Press PLAY to release. • Starting forward/reverse search during play started from menu on Video CDs may recall menu.
  • Page 24: Timer Recording

    • “TIMER REC WILL START SOON” appears on-screen for 2 minutes before Timer Recording starts. If DECK is in DVD mode, no message appears, but the VCR REC Light-up Indicator will flash. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo press to select:...
  • Page 25 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Review, Replace or Clear Program Contents: (Recording is not in progress) Press PROG to display Program List. Press to select number.
  • Page 26: Mts Broadcast/ Vhs Hi-Fi Stereo System

    SAP broadcast Secondary Audio Program (sub language) broadcast. Select SAP audio mode for the sub language. MONO broadcast Normal monaural sound broadcast. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo AUDIO (SAP/Hi-Fi) DISPLAY ® Equipped with Noise Reduction for true MTS reproduction.
  • Page 27 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Audio Mode for Recording Press AUDIO (SAP/Hi-Fi) to display audio mode. (Display disappears after 5 seconds.) Press AUDIO (SAP/Hi-Fi) repeatedly to select desired mode.
  • Page 28: Multi-Brand Control Feature

    • Not all functions listed may be controllable. • In TV mode, it may be necessary to press ENTER after pressing NUMBER keys for channel selection. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo POWER, INPUT, NUMBER keys, , DISPLAY ,...
  • Page 29 TV Brand Code Numbers Panasonic ... 01, 02 Quasar ... 01, 02 RCA ... 03 GE ... 03 Zenith ... 04 Magnavox ... 05 Sylvania ... 05 Sharp ... 06, 07 Sony ... 08 Important Notes • Some manufacturers use several codes for one brand.
  • Page 30: Tape Operation (Search System)

    • If Index Search is started very close to an index mark, that index mark may not be counted in the search. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Zero Search To quickly return to a specified tape location.
  • Page 31 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. NUMBER keys SELECT ACTION STOP SLOW+ PLAY REW/ SLOW- SEARCH DISPLAY CM/ZERO COUNTER RESET Repeat Play Set to playback a recording over and over. Press ACTION to display MENU.
  • Page 32 Press TAPE POSITION (or wait 5 seconds) to return to normal screen. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo *Important: If a remote control button does to select to select “TAPE...
  • Page 33: Special Vcr Features

    Special VCR Features Weak Signal Display Feature When “ON,” picture is displayed regardless of signal strength. Press ACTION to display MENU. Press to select “SET UP CHANNEL,” and press SET. Press to select “WEAK SIGNAL DISPLAY,” and press SET to set “ON” or “OFF.” •...
  • Page 34: Special Vcr Features

    • For more on VCR/TV selection, see “Record one station, watch another” and “Select channels at DECK” sections (see p. 21). For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.
  • Page 35: Copying Your Tapes (Dubbing)

    Copying Your Tapes (Dubbing) Connection DVD/VCR DECK VCR/ Camcorder (Hi-Fi) VIDEO VIDEO AUDIO AUDIO1 Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK. To monitor the dubbing, also connect TV as shown. Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R” AUDIO IN terminals on DECK.
  • Page 36: Disc Operation

    Press AUDIO repeatedly, select desired language. Audio soundtrack language being played back (see chart, above right). For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Ready Checklist Please read “Basic DVD Operation” on page 22. [Subtitle language]...
  • Page 37 * Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. When appears on the screen while a button is being operated, it means that the corresponding operation is prohibited by DECK or the disc.
  • Page 38 SET to start play of programs in the sequence selected. • To cancel, press STOP during play, then press CLEAR . For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo CLEAR ACTION SELECT STOP DISPLAY...
  • Page 39 * Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Notes • Up to 16 tracks can be programmed. • “ ” or “ ” (depending on disc) indicates additional PROGRAM PLAY screen.
  • Page 40 SET to begin random play. • To cancel, press STOP during play, then press CLEAR . For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Ready Checklist DECK is in DVD mode, press DVD. NUMBER keys...
  • Page 41 * Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Title Menu (DVD only) Some DVDs have more than one title, e.g. movies. If the disc offers a title menu, you can select the desired title number.
  • Page 42: Dvd-Ram Operation (Dvd-Ram Only)

    1 digit number 1 ••• 1 2 digit number 12 ••• Example> Press D.NAVI to clear Direct navigator menu. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Program No. Recording time 10 ➛ 1 ➛ 2...
  • Page 43: Play List

    * Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Play List If the DVD-RAM features a Play List, your preselected list of favorite scenes is displayed for easy access.
  • Page 44: Dvd Operation Using On-Screen Displays

    To return to normal screen, press DISPLAY repeatedly. <Example of DVD-RAM> For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Ready Checklist DECK is in DVD mode, press DVD. (See pp. 45, 46.) (See pp. 47, 48.) displayed (e.g.
  • Page 45 * Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Detailed Descriptions of each On-Screen Display ■ ■ ■ ■ ■ Disc information screen (for DVD-Video) 1.
  • Page 46 DECK or the disc. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo or NUMBER keys , and press SET .
  • Page 47 * Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. ■ ■ ■ ■ ■ DECK information screen (for DECK) a . Repeat Play mode (see p. 48) Repeat play mode can be selected.
  • Page 48 * Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo CURRENT PLAYBACK POSITION...
  • Page 49: Mp3/Jpeg Playback Operation

    MP3/JPEG Playback Operation This unit can play MP3/JPEG format CD-R or CD-RW recorded for personal use on a PC, etc. Some discs may not play due to the condition of the recording. Press POWER * on the remote or DECK. Press OPEN/CLOSE , then place an MP3/JPEG disc into the disc tray.
  • Page 50: Jpeg Playback

    | or SKIP- | Each press skips a file. Press ACTION to return to the DVD MAIN MENU. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo ■ Select PLAY MODE [JPEG Slide-show] (During STOP mode) Press to select the desired PLAY MODE (See below).
  • Page 51 SELECT ACTION STOP SLOW+ PLAY REW/ SKIP+ SLOW- SKIP - STILL ZOOM ANGLE MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia. JPEG Zoom (During JPEG Playback.) You can enlarge specific portions of a JPEG picture and select the zoom ratio using the ZOOM button on the remote during JPEG Playback screen.
  • Page 52: Settings For Dvd Operation

    MENU and go to step 2 to setup another item. Or, press ACTION twice to exit. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Once initial settings are done, they remain in memory (even after power is turned off) until changed.
  • Page 53 *Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Audio Output (DVD only) Select the digital output to be output from the optical digital audio output connector of DECK. Press ACTION to display DVD MAIN MENU.
  • Page 54 (top and bottom of screen has black margin). 16:9 : Set “16:9” when using Wide-screen TV. Press ACTION to exit this mode. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo ACTION SELECT Example • Pan & Scan (Factory preset)
  • Page 55 *Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. PROGRESSIVE OUT Sets the Component Video Output Connector (p. 10, 13) to output the Progressive scan signal. Press ACTION to display DVD MAIN MENU.
  • Page 56: Language Code List

    7583 Kashmiri 7065 Persian 7585 Kurdish 7073 Finnish 7589 Kirghiz 7074 Fiji 7665 Latin For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Code Language Code Language 7678 Lingala 8375 Slovak 7679 Laothian 8376 Slovenian 7684 Lithuanian...
  • Page 57: Warning And Instruction Displays

    Warning and Instruction Displays These displays will alert you to a missed operation or provide further instructions. PLEASE SET CLOCK BY PRESSING ACTION KEY PLEASE PREPARE FOR TIMER REC CHECK CASSETTE RECORD TAB NO CASSETTE TO CANCEL TIMER REC HOLD DOWN STOP KEY FOR APPROX 3 SEC VIDEO HEADS MAY NEED CLEANING...
  • Page 58: Before Requesting Service

    Remote Control DECK cannot be remote controlled... PROG buttons do not respond... For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Solution • Completely insert Power Plug into an AC outlet. • Press POWER button on.
  • Page 59 If you cannot resolve the problem, please call the Customer Call Center for product assistance at 1-800-211-PANA (7262). To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262). or, contact us via the web at:http://www.panasonic.com/contactinfo Solution • This DECK cannot play discs other than DVDs, Video CDs and CDs.
  • Page 60: Limited Warranty

    Panasonic DVD/VCR Deck Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b)
  • Page 61: Customer Services Directory

    Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. For hearing or speech impaired TTY users, TTY : 1-877-833-8855 Accessory Purchases Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, send your request by E-mail to: npcparts@us.panasonic.com...
  • Page 62: Spanish (Español) Quick Use Guide

    Medidas de seguridad y precauciones importantes PARA REDUCIR EL RIESGO DE GOLPES ELÉCTRICOS, INCENDIOS, HERIDAS O DAÑOS A ESTE PRODUCTO, LEA Y GUARDE TODAS LAS INSTRUCCIONES DE SEGURIDAD Y FUNCIONAMIENTO. TENGA EN CUENTA TODAS LAS ADVERTENCIAS INDICADAS EN EL MANUAL Y EN EL PRODUCTO. INSTALACIÓN 1 PRECAUCIÓN CON LA FUENTE DE ALIMENTACIÓN El equipo solo debe hacerse funcionar desde una fuente de a...
  • Page 63: Precauciones De Seguridad

    PRECAUCIONES DE SEGURIDAD PARA PREVENIR INCENDIOS O CHOQUES ELÉCTRICOS NO EXPONGA ESTE APARATO A LA LLUVIA O LA HUMEDAD. PARA PREVENIR CHOQUES ELÉCTRICOS, ASEGURASE QUE LA CLAVIJA HAGA JUEGO CON EL ENCHUFE Y CONÉCTELO COMPLETAMENTE. PRECAUCION PELIGRO DE DESCARGA ELECTRICA NO ABRIR PRECAUCION: PARA EVITAR LA POSIBILIDAD DE UNA DESCARGA ELECTRICA NO DESMONTAR LA CUBIERTA (O LA PARTE TRASERA).
  • Page 64 MENU. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Para solicitar ayuda, por favor llame al: 1-800-211-PANA(7262) o consúltenos a través de página web en:http: //www.panasonic.com/contactinfo DVD/VCR Terminal IN FROM ANT.
  • Page 65 Operaciones básicas para la reproducción Inserte un cassette, • La alimentación del DECK se activa. Si Auto VCR/TV (consulte la página 34) está en “INACT (OFF)”, presione VCR/TV en el control remoto para el modo VCR. Presione PLAY para reproducir el cassette. •...
  • Page 66 (Para liberar, presione PLAY ) For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Para solicitar ayuda, por favor llame al: 1-800-211-PANA(7262) o consúltenos a través de página web en:http: //www.panasonic.com/contactinfo Funcionnamiento del DVD utilizando visualizaciones en pantalla Cuando se presiona DISPLAY, la visualización en...
  • Page 67 Fijaciones iniciales Presione DVD para seleccionar el modo DVD. Presione ACTION en el modo de parada para visualizar MENU. Presione para seleccionar el artículo deseado. Presione SET . IDIOMAS DEL DISCO Todos los idiomas ofrecidos en el disco pueden ser ajustados. Si el idioma ajustado no es ofrecido en el disco, se seleccionará...
  • Page 68 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Para solicitar ayuda, por favor llame al: 1-800-211-PANA(7262) o consúltenos a través de página web en:http: //www.panasonic.com/contactinfo Cambio del idioma de la pista...
  • Page 69 Funcionamiento de la ejecución de MP3/JPEG Puede utilizar esta unidad para reproducir audio de formato MP3/JPEG, grabado para uso personal con una computadora, etc., en un CD-ROM o CD-RW. La ejecución no podrá realizarse en algunos casos, debido a las condiciones de la grabación.
  • Page 70: Index

    M Multi-Brand Control ... 28, 29 O On-Screen Displays (VCR) ... 11 One Touch Recording ... 21 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo P PLAY button (Playback a Tape) ... 8, 20 POWER button ... 8 PROG button (PROGRAM) ...
  • Page 71 A ACTION button ... 8, 52 ANGLE button (Multiple Angle Viewing) ... 8, 37, 51 AUDIO button (Audio Soundtrack Language) ... 8, 36 Audio Output (For Selecting Audio Output) ... 53 Auto-Power Off Function ... 23 C CLEAR button ... 8, 38, 40 Component Video Output ...
  • Page 72 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Printed in Indonesia Division of Panasonic Puerto Rico, Inc. LSQT0907 A Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park, Carolina,...

This manual is also suitable for:

Pv-d4735s

Table of Contents