Cisco 7832 Manual page 6

Connect with Activation Code Onboarding
Connect with Activation Code Onboarding
If your network has been configured to support this feature, then you can use Activation Code Onboarding
to connect to your company's phone network.
Enter an Activation Code
Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week.
Contact your administrator if you don't know your code or if you need a new one.
Procedure
Step 1 Enter your activation code on the activation screen.
Step 2
Press Submit.
Connect to Expressway
You can use Mobile and Remote Access Through Expressway to connect to your corporate network when
you are working away from your office.
Procedure
Step 1
Reset service mode through Settings > Admin Settings > Reset Settings > Service mode.
Step 2 Press Select when prompted to change the service mode.
Step 3
Enter your activation code or service domain on the Welcome screen and press Continue.
Step 4 Enter your username and password.
Step 5
Select Sign in.
Replace Your Existing Phone with a New Phone
You can change your phone model. The change can be required for a number of reasons, for example:
• You have updated your Cisco Unified Communications Manager (Unified CM) to a software version
• You wants a different phone model from their current model.
• Your phone requires repair or replacement.
Limitation: If the old phone has more lines or line buttons than the new phone, the new phone doesn't have
the extra lines or line buttons configured.
The phone reboots when the configuration is complete.
Before you begin
Your administrator needs to set up Cisco Unified Communications Manager to enable the phone migration.
Your Phone
6
that doesn't support the phone model.
Your Phone