Antenna Direct Mounting Type; Using Andrew Vhlp Type Bracket; Using Rfs Sb1 Type Bracket - NEC iPasolink 200 Manual

10-6

ANTENNA DIRECT MOUNTING TYPE

A. USING ANDREW VHLP TYPE BRACKET
Azimuth Angle Adjustment
A-1
A-2
A-3
Elevation Angle Adjustment
A-4
A-5
A-6
1. Loosen (1/2 turn) bolts
for adjusting azimuth
(top and bottom)
3. Loosen (1/2 turn) bolts
for adjusting elevation
Fig. 10-2 Location of Adjusting Nuts and Bolts (ANDREW VHLP type bracket)
B. USING RFS SB1 TYPE BRACKET
Azimuth Angle Adjustment
B-1
B-2
B-3
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only
Loosen bolts (1 in Fig. 10-2),
Adjust the azimuth angle by adjusting bolt (2 in Fig. 10-2),
Secure bolts loosened in step A-1 ,
Loosen bolts (3 in Fig. 10-2),
Adjust the elevation angle by adjusting bolt (4 in Fig. 10-2),
Secure bolts loosened in step A-4.
Loosen nuts (1 in Fig. 10-3),
Adjust the azimuth angle by adjusting the nuts (2 in Fig. 10-3),
Secure nuts loosened in step B-1,
ANTENNA ORIENTATION
4. Adjust elevation
2. Adjust azimuth
Installation