Setup Items - Hitachi S10 Series Manual

4

Setup Items

Set communication settings of the Display with GP-Pro Ex or in offline mode of the Display.
The setting of each parameter must be identical to that of the External Device.
"3 Example of Communication Setting" (page 8)
4.1 Setup Items in GP-Pro EX
Communication Settings
To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].
Setup Items
SIO Type
Speed
Data Length
Parity
Stop Bit
Flow Control
Timeout
Retry
Wait To Send
GP-Pro EX Device/PLC Connection Manual
Select the SIO type to communicate with the External Device.
Select the communication speed between the External Device and the Display.
Select data length.
Select how to check parity.
Select stop bit length.
Select the communication control method to prevent overflow of transmission and
reception data.
Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the
response from the External Device.
In case of no response from the External Device, use an integer from "0 to 255" to enter
how many times the Display retransmits the command.
Use an integer from "0 to 255" to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.
Setup Description
18
S10 Series SIO Driver
Continues to the next page.