Resetting Dcu 220 - Bosch DCU 220 User Manual

en | 48 | DCU 220 | Troubleshooting

Resetting DCU 220

You may have to reset (reboot) DCU 220 on some occasions when an error occurs and the
program you are using hangs up.
CAUTION: Data that wasn't saved before will be lost.!
If you are sure the operation has stopped and you cannot use the "restart" function of the
operating system, reset DCU 220
Reset DCU 220 by any of these methods:
Press Ctrl+Alt+Del on the keyboard. This opens the Ctrl-Alt-Del screen where you can

select actions including Restart.
Press and hold the P1 button for more than 2 seconds. This opens the Ctrl-Alt-Del

screen where you can select actions including Restart.
If the above action does not work, press and hold the power button for more than 5 seconds to
force the system to turn off. Then turn on the power again.
1 689 989 330 | 2016-11-30 Robert Bosch GmbH