Panasonic TK-CJ21 Instruction Manual page 17

Checks after installation
Please carry out checks to ensure proper installation and operation.
1
Run purified water for about 3 to 4
minutes to expel the air inside
the main unit.
Selector
lever
2
Check the items below and take respective
measures in case of abnormality.
3
Mark the month when the cartridge was
replaced using a permanent marker.
(See page 23 for guidelines on cartridge
replacement)
Check items
Is water leaking from the
purifier connection area?
Is water leaking from the
faucet?
How to run purified water
(See page 18 for details)
1. Set the selector lever to 'Purified'
2. Turn on the water faucet to let the
Example:
Replaced in
March
Inspection points and measures in case of abnormality
●
Is the water purifier installed securely onto the faucet?
→ Reconfirm the 'Installation Procedures' to
install the product securely.
* If the adaptor is loose, rotating the purifier
will tighten up the mounting.
●
Are the parts inside the water purifier assembled properly?
→Assemble the parts properly.
●
Is the end of the faucet (such as insulation
cap) chipped or cracked?
→Consult a plumber.
●
Is the faucet gasket being used an old one?
→Consult a plumber.
water flow
Water purifier connection
Faucet
Reference page
10-15
─
─
17