Panasonic TK-CJ21 Instruction Manual page 15

2
Remove the four screws of the installation adaptor, install the
installation adaptor, and tighten it using the mounting nut.
1. Remove the four
screws.
3
Loosely tighten the screws,
and loosen the mounting nut.
2. Loosen the mounting nut until a 3 mm to 4 mm
4
While pushing the main unit up, install it onto the faucet.
1. Tighten the two rear screws by
hand until they touch the pipe
in such a way that the pipe
is positioned in the center of
the installation adaptor.
Rear
screws
5
Turn the mounting nut manually, and
tighten it securely.
Important
● Do not use a tool to tighten up the mounting nut.
(Doing so may damage the mounting nut.)
● Do not turn the main unit to tighten up the
mounting nut. (Doing so will apply a powerful force
to the thread, possibly damaging the main unit.)
Upon completion of installation, check that the main unit does not easily rotate
and that there is no play.
clearance forms between the mounting nut and
main unit.
2. Use a screwdriver
to tighten the two
remaining screws.
Installation
adaptor
Pipe (faucet)
Mounting nut
Installation adaptor
1. Loosely tighten
the screws (x4).
Remaining
screws
2. Tighten the installation
adaptor using the
mounting nut.
15