Drive Control (From 1C00H) - HP LTO Ultrium Technical Reference Manual

Code
187Fh

Drive control (from 1C00h)

Code
1C00h
1C01h
1C02h
1C03h
1C04h
1C05h
1C06h
1C07h
1C08h
1C09h
1C0Ah
1C0Bh
1C0Ch
1C0Dh
1C0Eh
1C0Fh
1C10h
1C11h
1C12h
1C13h
1C14h
1C15h
1C16h
1C17h
Description
Supplied parameters out of bounds for this Buffer ID.
Description
Bad cartridge type. Attempted to load a cartridge of a type that drive control cannot
handle.
Attempted to unload a cartridge when Prevent Medium Removal is on.
There is no firmware image available for upgrade.
Firmware image is incomplete.
Firmware image has checksum or other errors.
Firmware image is not compatible with the drive configuration.
Firmware image is too big to upgrade from.
Internal error in the Drive Control firmware upgrade code.
A firmware upgrade cartridge was in the drive when it powered on.
A load without threading has been requested for a cartridge with unusable Cartridge
Memory.
Tried to load a writable cartridge with an unusable Cartridge Memory.
The write-protect tab setting was changed during a load.
A non-HP cleaning cartridge has been inserted in the drive.
Cannot determine the manufacturer of the cleaning cartridge.
No DRAM space reserved to hold the firmware image.
A cleaning cartridge was in the drive when it powered on.
Drive Control did an eject during the power-on sequence.
A firmware upgrade cartridge has been loaded when a data cartridge was expected.
A firmware upgrade cartridge was expected but some other type of cartridge has been
inserted.
Failure due to drive temperature being out of acceptable range.
Cleaning cartridge initialized by a non-HP drive.
Trying to convert a non-data cartridge into a firmware upgrade cartridge.
Operation failed because cartridge is not present or not ready.
Cleaning cartridge loaded when a data cartridge was expected.
Volume 1: hardware integration 87