Content Main technical speci cation Trouble shooting Product overview Guarantee and Service Indicator panel and switch Packing list Instruction Precautions Cleaning and maintenance...
Page 3
1 Main technical speci cation Model ADD4960 ADD4961 Rated voltage 220-240V~ Rated frequency 50Hz/60Hz Heating power 500W Cooling power Hot water ≥90℃, 5L/h Cold water ≤10℃, 2L/h Environmental temp. ST/T Coolant R134a, 38g Relative humidity ≤90% Protection of anti-electric shock...
Page 4
Product overview Bottle seat Drip tray Hot water button Lower cabinet Ambient water button Power switch Cold water button Condenser Indicator panel Power cord Water faucet* Dispenser ushing drain *ADD4961 has one water faucet, while ADD4960 has three water faucets.
3 Indicator panel and switch Power on indicator Heating indicator Cooling indicator Indicator panel When the dispenser is connected with power and the power button switches to ON, the power on indicator will light up. When the dispenser is heating up the water in the hot water tank, the heating indicator light will be on.
4 Instruction · Unpack the water dispenser. Place the dispenser indoors, on a at surface and at a distance no less than 15 cm from the back wall. · Insert the bottle vertically on the seat. · Press the hot water button until water ows out from the faucet. ·...
· Do not attempt to change the power cord by yourself if it has any damage. Contact the aftersales personnel for support. · If the power cable su ers any damage, contact the aftersales personnel for support. · The equipment must be installed keeping easy access to the electrical plug. ·...
For more details about warranty conditions, please refer to the warranty information in the box. If you need more information, please visit: www.Philips.com. Within the warranty period, you will receive free warranty service for any damage caused by the manufacturing process or components under normal operation con rmed by our maintenance service.
You cannot receive free warranty service under the following conditions: 1. Damage by improper operation, such as improper components connection, improper installation, deprived of manual use, misoperation. 2. Negligence and damage because of transportation or other accident. 3. Maintenance and modi cation without approval. 4.
Page 10
Please keep this user manual for future reference.