SUN2000L-(2KTL-5KTL)
User Manual
5.2 Installing the PE Cable
Context
Do not connect the neutral wire to the enclosure as a PE cable. Otherwise, electric shocks
could occur.
Procedure
Step 1 Crimp the OT terminal.
Issue 06 (2020-03-19)
The PE point at the AC output port is used only as a PE equipotential point, and cannot
substitute for the PE point on the enclosure.
When installing cables, ensure that the AC output power cable and PE cable are close to
each other.
When installing cables, ensure that the AC output power cable and DC input power cables
are close to each other.
When installing DC input power cables, ensure that the PV+ and PV– cables are close to
each other.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
38