Huawei Sun2000-5KTL-M1 Quick Manual

SUN2000L-(2KTL-5KTL)
Quick Guide
Issue: 01
Part Number: 31508725
Date: 2017-09-27
1
Overview
2
Installing the Device
Installation Requirements
2.1
Tilt and Space
Hole Combinations for Fixing the Mounting Bracket
(Recommended)
(Optional) (Optional)
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
(1) Front panel
(3) Mounting bracket
(5) LED
(7) DC input terminals (PV+/PV–)
(9) COM port (COM)
(11) Ventilation valve
(13) Alarm port (ALARM)
NOTICE
1. The information in this document is subject to change without
notice. Every effort has been made in the preparation of this
document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not
constitute a warranty of any kind, express or implied.
2. Before installing the device, closely read the user manual to get
familiar with product information and safety precautions. You can
log in to http://support.huawei.com/carrier/, and search for the
device model on the Product Support tab page to view or obtain
the user manual.
3. Only certified electricians are allowed to operate the device.
Operation personnel must wear proper personal protective
equipment (PPE) all the time.
4. Before installing the device, check that the package contents are
intact and complete against the packing list. If any damage is
found or any component is missing, contact your dealer.
5. The device warranty does not cover the following situations:
 The warranty label is removed.

The device is damaged due to violation of the storage,
transportation, installation, and operation regulations specified
in this document and user manual.
Dimensions
Hole Combinations for Fixing the SUN2000L
A (recommended) Holes 2 and 3
B (optional)
C (optional)
D (optional)
1
(2) Mounting plate
(4) Heat sink
(6) DC switch (DC SWITCH)
(8) Battery terminals (BAT+/BAT–)
(10) AC output port (AC)
(12) Antenna port (ANT)
(14) Ground point
Holes 1 and 3
Holes 1 and 4
Holes 2 and 4