Auxiliary Power, Control And Serial Communication Cables; Preparing The Cable Entry And The Cables - ABB ACS1000 User Manual

7.6 Auxiliary power, control and serial
communication cables
See Layout drawing in Appendix C – Mechanical drawings for information on:
-
-
See Appendix D – Wiring diagrams for information on:
-
-
7.6.1

Preparing the cable entry and the cables

7.6.1.1 Determining the cable length
1. Determine the required length of a cable between the point of entry and the connection
point (1 in Fig. 7-12) inside the cabinet.
2. Cut the cable to the required length before connection.
A
Figure 7-12: Cable entry from top (A), from bottom (B)
3BHS213401 E01 REV H
Project-specific cable entry
Dimensions between point of cable entry and terminals
Conventions for cross-references and device identification
Terminal designations
1
ACS1000 AIR-COOLED USER MANUAL
07 ELECTRICAL INSTALLATION
B
1
98/184