Usb Storage Device Requirements; Connect A Usb Storage Device To The Cable Modem Router - NETGEAR C6300v2 User Manual

USB Storage Device Requirements

The cable modem router works with most USB-compliant external flash and hard drives.
For the most up-to-date list of USB storage devices that the cable modem router
supports, visit https://kb.netgear.com/18985.
Some USB external hard drives and flash drives require you to load the drivers onto the
computer before the computer can access the USB device. Such USB devices do not
work with the cable modem router.
The cable modem router supports the following file system types for full read/write
access:
• FAT16
• FAT32
• NTFS
• NTFS with compression format enabled
• Ext2
• Ext3
• Ext4
• XFS
• HFS+
Connect a USB Storage Device to the Cable
Modem Router
ReadySHARE lets you access and share a USB storage device connected to the cable
modem router USB port. (If your USB storage device includes special drivers, it is not
compatible.)
To connect a USB storage device:
1. Insert your USB storage device into the USB port on the cable modem router.
2. If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the
cable modem router.
When you connect the USB storage device to the cable modem router USB port, it
might take up to two minutes before it is ready for sharing. By default, the USB
storage device is available to all computers on your local area network (LAN).
Share USB Devices Attached to
the Cable Modem Router
AC1750 WiFi Cable Modem Router
39 User Manual