Mounting And Connection Instructions; General Information - Honeywell IDENTLOC 032220.17 Mounting And Connection Instructions

Mounting and Connection Instructions

IDENTLOC-Transmission Unit
Item no. 032220.17

1. General information

The IDENTLOC sensor family serves for opening and lock monitoring of windows and doors as
well as for object monitoring without galvanic connection between the fixed and the moving part.
Wireless energy and data transmission between the transmission unit and the sensor.
The evaluation unit (EU) connected to the transmission unit permanently monitors the energy
and data transmission between the transmission unit and the sensor.
Application:
Normally, the transmission unit is mounted on the fixed part and the sensor on the moving part.
Furthermore, the transmission unit can be used in connection with all Novar code carriers. For
object monitoring, it is for example possible to attach an ID card to the reverse of a picture and
the transmission unit to the wall behind the picture. Whether the transmission unit is to be
embedded in the wall or mounted on the wall surface depends on the constructional conditions.
P01221-10-002-03
2011-04-20
approval
see Chapt. 4
D
Subject to change
GB
without notice