Sony FMP-X5 Help Manual page 54

Hide thumbs Also See for FMP-X5:

Table of Contents

Help Guide

4K Media Player

FMP-X5

Performing the initial setup (Initial Setup)

The Initial Setup screen appears on the TV screen when you turn on the 4K Media Player for the first time or after the

4K Media Player is initialized. You can configure the following settings for the 4K Media Player by following the on-

screen instructions in the Initial Setup.

Press

to select an item you want, then press

Network Setup

Configure settings to connect the 4K Media Player to the internet.

Audio from HDMI OUT

Configure settings for the HDMI OUT jacks of the 4K Media Player to output audio signals.

Performing the initial setup manually

If the Initial Setup screen does not appear or you want to display the Initial Setup screen manually, you can display it by

following the procedure below.

1. Selecting

(Settings) - [Initial Setup] from the Home menu.

Note

Switch the input of the TV to the input to which the 4K Media Player is connected to use this function.

Hint

If you are informed that a new software update is available during the initial settings process, update the software of

the 4K Media Player by following the instructions on the screen.