Place Your Camera - NETGEAR Arlo Go Quick Start Manual

Set Up Your Arlo Go Camera
Use the Arlo app and your Arlo account to set up your Arlo Go camera. If you already set up an
Arlo account, you can add the Arlo Go camera to your account.
During setup, your Arlo Go camera must be connected to a network.
Note: This requires that you are using a compatible device and a mobile service plan. Additional restrictions
and data charges might apply. Coverage and service are not available everywhere.
After you add your Arlo Go camera to your Arlo account, you can place
the Arlo Go camera anywhere in your service provider's network coverage area.
For information about optimizing LTE connectivity,
scan the QR code or visit http://tinyurl.com/jyoysqo.

Place Your Camera

You can place your camera on a flat surface or mount it.
¾ To mount the camera on a wall:
1. Place the wall plate and secure it with
three screws.
2. Attach the camera to the wall plate.
If you're mounting the camera to drywall, be
sure to use the included plastic drywall anchors.
4