Preparing Your Lcd Hdtv For Wall Mounting; To Remove The Stand Base - Vizio SV420XVT1A User Manual

Preparing Your LCD HDTV for Wall Mounting

The VIZIO SV420XVT1A can either be kept on the stand base or mounted on the wall for viewing. If you
choose to mount the SV420XVT1A on the wall, please follow the instructions below for removing the
stand base.

To remove the stand base

1. Unplug all of the cables and cords from your SV420XVT1A.
2. Place the SV420XVT1A face down on a soft
and flat surface (blanket, foam, cloth, etc) to
prevent any damage to the TV.
3. Remove the total of eight (8) screws holding
the base to the SV420XVT1A.
4. Carefully remove the stand base.
Now, the SV420XVT1A can fit securely to a mount (sold separately) by utilizing the mounting holes in the
center of the back panel of the TV. Please
make sure to read the instructions of your
specific mount to properly hang the
SV420XVT1A.
The pitch of the mounting holes is 600mm
horizontally and 200mm vertically.
The screw type required is metric M8,
1.25mm pitch. The length of the screws will
depend on the thickness plate being attach
to the TV set; our brackets come with
different length screws.
To find the perfect mount for the VIZIO SV420XVT1A, browse VIZIO's certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
Version 6/2/2008 6
www.VIZIO.com
VIZIO SV420XVT1A User Manual