Connecting A Pc Computer - Vizio SV420XVT1A User Manual

2.7 Connecting a PC Computer

1. Turn off the power to the LCD HDTV and PC Computer.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the
other end to the RGB PC input (blue area) at the rear of the LCD HDTV.
3. Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the
rear of the LCD HDTV.
4. Turn on the power to the LCD HDTV and PC Computer.
5. Select RGB using the INPUT button on the remote or side of the LCD HDTV.
Note:
a) For a better picture quality when connecting a pc computer through RGB PC, set your pc
computer timing mode to VESA 1366x768 at 60Hz. For the best picture quality, please refer
to the pc or graphic card's user guide to find out if it is capable of an output of 1920x1080 at
60Hz resolution when using the parameters and values given to you on Section 2.7.2 of this
User's Manual by way of VESA Reduce Blanking timing.
b) Refer to your pc computer user manual for more information about the video output
requirements of the product.
c) A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an
electronics store.
Version 6/2/2008 30
www.VIZIO.com
VIZIO SV420XVT1A User Manual